Both Systems meet all current U.S. State Regulation as a "Source Capture System" capable of exhausting not less than 50 cfm per station. (Our systems are 120 cfm capturing even more dust particulate and odor)
(4) In IMC, Table 403.3, Note h is deleted and replaced with the following:
"For a nail salon where a nail technician files or shapes an acrylic nail, as defined by rule by the Division of Occupational and Professional Licensing, in accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking Act, each nail station where a nail technician files or shapes an acrylic nail shall be provided with:
a. a source capture system capable of filtering and recirculating air to inside space not less than 50 cfm per station; or
b. a source capture system capable of exhausting not less than 50 cfm per station."
Except as provided in paragraph 3, the requirements described in paragraph 1 apply beginning on July 1, 2020.
The requirements described in paragraph 1 apply beginning on July 1, 2014 if the nail salon is under or begins new construction or remodeling on or after July 1, 2014.
(5) In IMC, Section 403, a new Section 403.8 is added as follows: "Retrospective effect. Removal, alteration, or abandonment shall not be required, and continued use and maintenance shall be allowed, for a ventilation system within an existing installation that complies with the requirements of this Section 403 regardless of whether the ventilation system satisfied the minimum ventilation rate requirements of prior law."